----- Item Description -----
- Item type: Security Camera / IP Camera
- Supported Operating Systems: Windows XP / 7 / 10
- High Definition: 1080P(Full-HD)
- Lens: 3.6mm
- Connectivity: IP/Network Wireless
- Power Consumption(W): 6W
- Minimum Illumination(Lux): 0.1LUX/F1.2
- Sensor Brand: CMOS / Sony
- Camera Resolution: 1080
- Megapixels: 2MP
- Alarm Action: Local Alarm
- Video Compression Format: H.264
- IR Distance(m): 15M
- Power Supply(V): DC 12V 2A
- Viewing Angle : 75°
- Technology: Infrared
- Dimensions (L x W x D)(mm): 13 x 11 x 7 cm
- Supported Mobile Systems: IOS / Android
- Cloud Service: Cloud Storage WIFI Camera
- Network Interface: Wi-Fi/802.11/b/g
- Technology: Horizontal:355 vertical:90
- IR Distance: 8 IR LEDs with 15 Metres IR distance
----- Feature -----
- 30-50M Day and Night Vision
- Support Motion Detection and Alarm Tone Function
- Support wireless(WIFI) and Wired two Mode
- Support Two-Way Audio Talk Speak Real Time
- Support ONVIF 2.0, Work with Our NVR
- Support Pan 320 degree/ Tilt 90 degree And 4X Digital Zoom
- Support TF Card Max 128 GB And one Month Free Cloud recording.
- Remotely View via the App "carecam" on Smartphone
- Dustproof and Waterproof
----- How To Setup -----
1. Download and Install the App
a. Make sure your mobile devices are connected to the network properly (Wi-Fi)
b .For Android phone users,you can download the app by scanning the QR code in the product package with your mobile phone.
2. Connect the Cloud IP Camera
a. Open your APP register a new account or log in your old account
b. Add the camera device (You can choose four ways to add your camera)
c. When your add your camera, please put your camera in a place where the wifi signal is stable (Put your phone and camera closer)
----- Cannot Connect To WIFI Successfully? -----
1.Please make sure the WIFI Password is correct.(Our Camera Only Support 2.4Ghz Wifi)
2.Please make sure the router signal is stable (place IP Camera close to your router for first connection is Recommended). The Camera will not work on a 5Ghz wireless standard at this time. If you have a dual-band router, be sure to segregate your wireless channels and connect the camera to the 2.4ghz channel.
3.Please check that your wifi name and password do not have special symbols, our camera can only recognize English letters and numbers.
----- Reset -----
Check The IP Camera: please make sure the IP Camera send Waiting for connection message after the plug. If not, we need to reset the Camera.
1.Why Reset
Reset is used to boost the IP Camera system, which become more efficient to accept the unknown router and connect it.
Reset will erase all user settings including WIFI information, access password, alarm information, arming zones information.
2.The Steps
Find the reset hole at the bottom of the device, and then use needle to insert it, press it more more than three seconds after hearing "di" sound, when hearing 'Reset to be defaulted setting' sound, then camera reset successfully.
3.After the reset, user can start to connect it by WIFI
----- The Camera can't Connect to WIFI -----
You can use the pointer we sent you to directly insert the reset button to reset the camera button for about 5-6 seconds. You will hear a Voice prompt reset success!
After you use the QR code on the mobile phone to scan the Instruction manual to download: "YCC365 plus" and then click on the downloaded the software. After you enter, you will be prompted to log in with your username and password. You will receive a message reminding you to fill in and then set a password to complete the app registration, then you log in again is your own registered username and password, please remember The user name and password you registered!
Shipping Info:
- Estimated Delivery Time: US 10-20 Days; Worldwide 10-25 Days.
