Description
No Drilling
- The snap-up holder sucks on the wall with its pressure
- No drilling no hole, no sticker no trace.
- Easy Install and Remove
- Can Change Position any time without leaving a damaged wall behind
- Space-Saving rack
- Maximum weight bearing is up to about 10 pounds.
- Durable and can be used for a long time without deformation.
- Drain hole to avoid mold growth.
- Suitable for marble, drywall, glass, tile, virtually, almost any smooth surface, for best results, use on non-porous surfaces such as glass, tile or fibreglass.
Installation
1. The installation position requires a right angle of 90 degrees, and the installation environment requires smooth tile, glass, wood and wall.
2. When installing the product, the rubber strip should be flat on both sides, and the product should be placed horizontally in the corner.
Note that the rubber strip is close to the wall but the plastic parts at both ends of the product cannot touch the wall. If the wall is touched, the whole product will be stressed unevenly.
3. Push the product stabilizing it into the corner then snap the buckle underneath 4.for best installation results avoid wetting the product for 12 hours following installation.
Specification:
Material:ABS,PP
Net Weight: 380g/13.4oz
Package: 1*Snap-up rack.
