Product Description
Specification:
Materials: ABS
Inlet/Outlet: 4mm Threaded port
Voltage&Power: DC 12V 19W or DC 24V 24W (optional)
Flow Rate: 800L/h(m3/h)
Max Water lift: 5 metre
Sizes: About 7.7cm(L) x 4.2cm(W) x 6.5cm(H)
Working environment temperature: 1-60℃
Max circulating water temperature: 100°C
Noise: <40 db (water) under operation
Drive mode: electromagnetic
Conveying medium: hot water pump
Pump shaft position: horizontal
Impeller structure: open impeller
Impeller suction method: single suction type
Features:
- Uses advanced electronic components and high-quality wear-resistant shaft.
- Long working life, continuous power-on working time of more than 10,000 hours.
- It is smooth operation, high efficiency, good performance.
- Small volume, low noise, safety and environmental protection.
Usage:
The water pump cable (red line is positive, do not take the wrong) received a suitable power supply (the battery can be a battery, it can be a power converter), and then a good water pipe, then pump into the water, Can be used normally.
(Note: The DC brushless pump is a centrifugal pump, the pump water flow with the increase of the head decreases. No diving without self-priming function, prohibit no water free.)
Common Troubleshooting:
1. The pump flow is reduced or no water. (The pump chamber can be disassembled for cleaning).
2. Tland use when the pump does not run water. (There is air in the pump or in the pipeline.)
Note:
1.Do not take the wrong pump positive and negative.
2.Prohibit not through the power converter will be connected directly to the 220V power supply pump.
3.Is strictly prohibited for strong acidity, alkali and other damage to the pump medium.
4.The pump is suitable for medium temperature 1 ℃ -60 ℃.
Package included:
1 x Brushless Motor Water Pump
More Details:
